Bandai MG RB-79 Ball Ver.ka

Bandai MG RB-79 Mobile Pod Ball Ver.Ka ( Part 8 Complete! )

Bandai Master Grade RB-79 Mobile Pod Ball Ver.Ka is completed. I would like to share some pictures, and I hope you like it. This time I did not do major modifier, just cut and remove some Exterior panels. I've painted with the image of mec…

Bandai MG RB-79 Mobile Pod Ball Ver.Ka ( Part 7 base )

After I finish all work for Ball, I started finish the display base. It is not an elaborate work, just using Action Base from Bandai with a little paint work. 1st, I put a rod in to the main thruster. This will be a stand arm. The main thr…

Bandai MG RB-79 Mobile Pod Ball Ver.Ka ( Part 6 Weathering2 )

I finised 1st stage of the weathering, and going to add some more weathering. I add splattered oil dirt on he entire kit. I put the thinned paint(brown, or ark yellow) in toothbrush, and blowing the paint by rubbing the tooth brush in fron…

Bandai MG RB-79 Mobile Pod Ball Ver.Ka 5 (Weathering 1 )

After the kit was coated with clear spray, I can start weathering. I did the weathering using oil paint as usual. First, I added water, rust and oil stains with black oil paint. I added same effect as cockpit hatch on side camera housing. …

Bandai MG RB-79 Mobile Pod Ball Ver.Ka 4 ( Exterior panel paint and assembly )

Today, I am going to write about exterior panel. I was starting weathering from Cockpit Hatch. The parts was painted with flat white using spray paint first, then paint dark (wine?) red using air brush. I did wet sanding using very fine pa…

Bandai MG RB-79 Mobile Pod Ball Ver.Ka 3 ( Paint(1) and frame assembly)

After all parts was glued, I started painting. The Master Grade kit is divided into many parts, so I do not need mask most of the place. Just paint. I would like to get strong paint coating, so I use Tamiya Spray Paint for color of white a…

Bandai MG RB-79 Mobile Pod Ball Ver.Ka 2 ( a little modifications)

After temporarily assembled, I did a little modifications to body shell parts. I would like to make this Ball like Star Wars mecha. I cut some body panel to expose inner frame. The area marked with red .pencil was detached from a body pane…

Bandai MG RB-79 Mobile Pod Ball Ver.Ka 1 (Temporarily assembled)

I am starting new production article. I finised this kit some years ago, but I took a lot of pics and I would like to share it. next item is RB-79 Ball from Bandai Master Grade. as always, I did Temporarily assemble first to check where I …