After I finished painting of the diorama base, then I finished wood trim for base.
The wood part is stained and clear coat with satin finish.
I also made wnderground water in the right corner of the diorama base.
First, create a frame by fixing the plastic board with a clamp.
Then, I poured Clear Epoxy resin in to the corner.
Initially, filling the gap between the frame and the base by pouring a small amount of resin.
Resin was dyed in blue Tamiya acrylic paint.
Result of I've tried, When I have poured a lot of resin at a time, I found that air bubbles came out. So, I was poured by dividing the resin into several times.
In poured the third time it was filled.
Then, I remove the frame...
And, I was flattened the sides with a file, then sanding.
Finally I was finished with wet sanding.
Done!
The next step is to the final check of the pose of Gm and Z'Gok.