Entries from 2015-01-01 to 1 year
After the kit was coated with clear spray, I can start weathering. I did the weathering using oil paint as usual. First, I added water, rust and oil stains with black oil paint. I added same effect as cockpit hatch on side camera housing. …
Today, I am going to write about exterior panel. I was starting weathering from Cockpit Hatch. The parts was painted with flat white using spray paint first, then paint dark (wine?) red using air brush. I did wet sanding using very fine pa…
After all parts was glued, I started painting. The Master Grade kit is divided into many parts, so I do not need mask most of the place. Just paint. I would like to get strong paint coating, so I use Tamiya Spray Paint for color of white a…
After temporarily assembled, I did a little modifications to body shell parts. I would like to make this Ball like Star Wars mecha. I cut some body panel to expose inner frame. The area marked with red .pencil was detached from a body pane…
I am starting new production article. I finised this kit some years ago, but I took a lot of pics and I would like to share it. next item is RB-79 Ball from Bandai Master Grade. as always, I did Temporarily assemble first to check where I …
Bandai Master Grade MS-07B Gouf is completed. I would like to share some pictures. front view rear. I have changed the shape of the head. I have expanded the width of the mouth, also, it has been extended. So now, mouth will overlays on to…
Based paint is finished, and put decals, then following is weathering. First, in order to protect the base paint ans decals from weathering, I sprayed clear coat. Once the clear coat is dried, I will start the weathering. I used oil paint …
My work came to painting process. Before painting, by spraying the surfacer in overall, to check whether the surface is being processed properly. If found any problems, sanding again, and repeat to the painted the surfacer. If there is no …